In this article we’re going to examine how to make your own dog mask. We’ll cover the basics and then go on to look at some of the more advanced tips and tricks that you can use.
For those who have a dog that likes to bark, and particularly if your dog loves to play in the backyard and other regions of the home, you will need to get them some special dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the set-up that will look a little scary at first, but it’s actually quite simple. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t just cut a rectangular shape out of the cardboard, so you’ll need to cut around the edge of the mask so you get something that resembles a cone. The main thing here is to be realistic with what kind of paper plate which you’re using.
Then you’ll need to wrap the cardboard around the edges of the paper plate, making sure there is a good seal between the two pieces so that you can ensure that nothing will leak when you place the mask on. Be sure that the edges are cut so that the edges aren’t sharp, as this may damage the edges of the mask.
Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making certain it runs smoothly and evenly across the whole mask. You’ll want to start with one side of the mask first, so that you can work your way around it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it’s best that you leave about one-third of an inch of paint on the edges so that it runs across the cardboard.
Don’t worry too much about the paint getting stuck to your mask. It’s easy to remove it later, and it’ll leave you with a wonderful finished mask to show off to everyone! It’s also a good idea to wipe away any excess paint once you are done, so you don’t end up with smudges or smears on your dog.
Then it is time to paste the mask on your dog’s head. First you will need to be certain that you get a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it’s secure, then you may start to glue the mask onto the dog’s face. Take the piece of cardboard that is used for the foundation of the mask and then fold it over. Be certain it’s quite powerful and then use your hands to secure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds till you have the mask snugged securely onto the surface of your dog. Don’t make the folds too big or else it could look messy. Once you’ve completed this, you can then take out the mask and then attach the cardboard ears. And attach the other area of the mask on the dog. Make certain that the ears are level and be sure that it’s not too short or long as this will cause some problems with mask dog the mask slipping off the dog’s face.
If you’re using a dog mask as your dog protection, you will have to do some sanding to make certain it’s safe on your dog. You can do it by sanding off any excess paper which might have been eliminated from your mask.